Features

Boards of pine have the following features:

- strength;
- ecology;
- moisture;
- durability;
- resistance to mold and fungus.

It is well known that the coniferous species, especially pine, have a high content of internal resin that allows the wood to withstand various natural factors (excessive moisture, rot, etc.). A perfect balance of price and quality with the benefit makes it different with similar material made of other tree species, such as, for example, alder, cedar, larch, aspen and others.

The normal rate of pine lining humidity is between 5 and 15%. In any room, trimmed this material almost immediately creates a special microclimate that will be equally useful for both us: people and our pets.

Wall paneling from pine is very attractive material, so it easily can be found in the interior of a fancy restaurant, saunas, bowers and cottages representative ownerswhose love to pamper themselves and, of course, once again surprise their guests. Most often, pine linings used for decorative doors, columns, niches and slopes.

The world’s largest suppliers of this material are Finland and Russia, which is not surprising, because many forests in those two countries abound conifers.

Wood single material having such unique advantageous properties:
1. This material is environmentally friendly. In addition, during the construction of baths, the only building material is wood, because it has all the necessary characteristics.
2. High strength.
3. Exceptional durability. Wooden houses with the right care can stand for more than one century.
4. Reasonable cost.
5. Easy to use.

Field of application of lumber

Timber from producer successfully applied not only in the construction of houses and baths. As we know, the people in a city apartment and aspire to create a cozy corner with the help of beautiful accessories made of wood; as demand grows on wooden doors and windows.Maybe this opinion seems to someone controversial, but the wood is really completely environmentally friendly material that can not only create a healthy atmosphere in the room, but also to elevate its coziness. One has only to think, range of applications from the manufacturer of lumber so wide that to list all at once is impossible, like the construction of houses, cottages, saunas, interior elements, doors, windows and floor finishing.Most often lumber made from only two tree species: spruce and pine. They are the easiest to use and the cost of them surprises even the inveterate builder.Experienced builders are well aware about which properties carry a timber.For example even pine, which is characterized by its resistance to water which makes it suitable for the construction of baths and saunas, where there is always high humidity.

Features of lumber production

Our company produces and sells timber from the manufacturer wholesale and retail already for many years.We have partnerships with other manufacturers, who are already established as competent and responsible suppliers.Modern precision equipment, skilled workers and quality raw materials allows us year after year successfully to sell timber from the manufacturer of high quality; the price is lower than that of neighboring woodworking organizations.Before each stage of production the products pass strict selection in accordance with the generally accepted Russian standards GOST or European standards if lumber madeby the European standard (Lining, block house, etc.) After placing the order the costumer can expect after few days the amount which required ready, paying and picking it up.

According to the number of longitudinal surfaces and the degree of processing, wooden beams are divided into:

• two sides processed;
• three sides processed;
• squared.

There are two types of timber production:

• solid;
• glued.

Solid timber is also known as standard timber. After the milling sawing, it has all four sides treated and perfectly smooth surface.This type of timber most commonly used for building houses, it does not form any cracks, and the boards themselves adjoin to each other tightly without creating pockets of rotting wood.

It’s very important that the extra supporting of thermal insulation or sealing materials when building a house are not required to use.The only phenomenon that can have a negative impact on the timber, that the result of the sudden changes in humidity and temperature environmentcan be cracks that later can lead to their final destruction.However, the bar has another drawback: it is always a core of wood, and it is known, is the softest part of the wood in the structure.

Bar wooden type looks very similar to a kind of «sandwich» with layers, as due to its gluing a certain amount of timber becomes a kind of monolith, which is becoming one peace.Glued timber produces usually from softwood like: spruce, pine, larch and cedar.For the beginning the logs must be dried in special chambers to be the measure moisture after drying not more than 8.12%, and then treated with rails on all four sides by a milling machine.Next, the material is impregnated with antiseptic preparations and eventually glued together. Beam thickness is proportional to the number of layers in it, the more layersthe thicker obtained product itself. Beam thickness should not exceed 260 mm, which is the maximum thickness. The boards glued with special mixtures which are water resistant, transparent and reliable.

Russian standards require manufacturer to label their product. Labeling should be based on the timber used in its manufacture material; numeral indicating the grade of wood, the wood species (coniferous or deciduous) and the diameter of the cross bar.

The quality of wood depends on the place and the area where it grows. Thus, spruce which grown in the northern regions of Russia, characterized by great durability, better physical and technical characteristics.And those, of course, are important factors when choosing a material.However, in all of its properties, spruce is still inferior to pine about 10 percent.At the same time, the coefficient of quality spruce is ahead the pinetree by 3-4 percent.

Treating such timber is quite difficult because of the abundance of hard brancheswhich occurrence on the surface is not uncommon. But spruce also has advantages in relation to other species: it has high resonance abilities, one-sided structure, longer fibers and a slight resinous.Now, people are increasingly turning to foreign manufacturers of building materials, especially in the construction of baths and saunas. For example, among Russian consumers, particularly popular Canadian yellow pine. This wood is very strong, but has a lot of resins.

The only radianttype of pine has less pronounced resinous smell and like most softwood lumber, it is very strong and a good conductor of heat. However, radiate pine is not recommended for finishing works in the bath, because it is not sufficiently dense and has many pockets of tar, which is not good for areas with high humidity.

From the entire described above can be summarized that all varieties of pine are characterized by softwood with a nice pronounced texture.Staining and etching processes that can occur over time, significantly slowed down due to the high content of resinous substances.Before exposing pine wood processing, and any kind of softwood lumberthey should be treated trees,while the mechanical treatment to not be so tough.In addition, the procedures for pine dressing is necessary, it makes it easier to protect wood against fungal diseases and loss of color.

In the production of timber can also be used such softwood and hardwood, as linden, larch, Angara pine, cedar, oak, Abash, needles and many others.

Before using the material required for the subsequent production, it undergoes a thorough selection, which resulted in most of the raw materials sifted out.Also, from a technical point of view, our material is entirely congruent with the state standards. Our quality is high and the prices are moderate, so even the most demanding client, without any doubt, will satisfy all their needs.

Everyone knows that the best part of all building materials made entirely from wood. This material is truly indispensable because of its excellent physics and technical parameters, natural appeal texture and many other great qualities inherent to this type of material. Most often, according to the statistics used wooden boards at low prices. This is duein the first place, to a relatively low price and the properties that have a clean timber.

The main advantages

The main factor for mass use lining is not only the low cost.Wooden linings consumers like and others not less important characteristics. For example, it has excellent sound insulation, very comfortable and supple in the processing, it can without much effort be used in repair work.

Also, if you use it for interior decoration, it allows you to maintain a normal level of humidity. That is why such material does not be afraid to use in areas with excessive moisture content. As a result, this led to the fact that as one of our activities is the production and sale of lining for sauna. Consequently, a healthy microclimate in the room trimmed clapboard provided to you.

Technical specifications

Lining itself inherently is a thin board. Because of special grooves, strengthen lining boards together pretty easily, and the strength of the resulting coating and remains consistently high.

In the modern world paneling used in almost all areas of construction and finishing works. It is an indispensable material for exterior and interior decoration with a high degree of humidity (bath, sauna), residential buildings, and many other building.

The scope and possibilities

Recently, the choice of this material on the market is very high. Price wooden lining composed in the first place of feedstock. Most often linings made from softwood, such as, for example, larch, spruce, pine, cedar and so on. Much less you can find lining from linden, aspen and other hardwoods. Your choice should depend on the specific purposes for which the material will be used:
- For bath and sauna is best suitable lining of lime, oak and birch.

- Use linings for rough work are recommended only that which is made of relatively cheap materials such as spruce and pine.

- Finish indoors expedient to undertake lining of beech, maple or oak.

The price depends not only on the variety of raw material on wooden lining but also on the country of origin. Just from our own experience, we can say that the most expensive material is a material made and imported from Finland. If you need a more economical solution, then, in this case, the ideal option would be the boards from Russia, for example, produced by our company.

Constructed house from a bar are different ecological and warmth. They are very warm in the winter and they can withstand any weather. Bruce hardly exposed to rotting, because built house will serve for decades. A very important feature of timber is its environmental cleanliness and safety for living people. It’s worth to pay the high cost of this lumber because of it healthy advantages.

Distinguishing characteristics include the ability of timber to breathe at any time of year and weather conditions. It can withstand a large load, making it possible to use it as a frame. Bruce is mainly made of tree species such as spruce and pine. Additionally, veneer lumber has minimal shrinkage. This means that over the life of the house, it will keep crisp geometric shapes designed initially.

The cost of timber offset by a series of useful properties:
- Reliability and durability.
- Environmental material.
- Crisp geometric lines.
- Timber hardly susceptible to rotting.

To date, it may be noted that from the beam produce most of the wooden houses. If we consider the shrinkage of the house, it is only one percent, in this lies in the construction of such rapidity of timber houses. The construction of house from a bar reminding about the designer where by his own order each item is placed in sequence.

If we take the value of timber, the resulting structure of the house is not much differing from the price of the material itself. The average construction time is three months. If you compare home from a bar with a house made of logs, the difference is tangible, because the last shrinkage would take about a year, sometimes even two. And only after that, you can start the decoration.

Edged board is a material made from softwood logs, trees, with the passage of cleaning the whole cortex, including the edges. During the construction should always choose specific type of woodbecause each type of tree has its own strength and moisture resistance.Before you buy edged board you have to remember that it should be without wane (a particular edge of a ready board, which is made of round wood and thus, can be seen at the edges of the uncut). In fact, in this lumber wane happens rarely, in exceptional cases and only in strict order.

The main characteristics of the boards:

Usually, the boards are separated by specific parameters: thickness, width, kind of wood, the final amount of the processing of the material and of course, the purity of the board. After considering all these parameters we can get different sorts of wood. That sort of variety of finished material cost depends on.Buying edged board is possible when considering specific standards, which determine the grade of the product. Larch is the most expensive option, and at the same time, it has very high reliability and stability.

Usually, the production of boards occurs at certain specified standards sizes. But we are producing boards depends on the order, significantly different from the standard sizes depending on the given conditions.

The standards include:
- Width — 100, 150, 200 mm.
- Thickness — 25, 40, 50 mm.
- Length — 6 meters.

In order to choose and buy edged board is necessary to consider the purpose of its application:
- Furniture.
- Flooring.
- Overlapping roof.
- Construction of internal partitions.
- Creation of frameworks, including yard buildings and garages.
- Construction of garages, gazebos, etc.

More expensive and durable materials are used to create various pieces of furniture. And for construction purposes usually apply cheap wood.

If you plan to use this material as a decoration inside and outside the house, it is, of course, must be made of other, more valuable wood (hardwood).The main difference between edged timber and unedged is the ability to release the board from the bark by trimming what can be done immediately after cutting the whole logs.

Most often, a dry cut timber used in the exterior decoration and interior design, as well as to create a wall slabs. Important advantages of this type of material are a good degree of resistance to corrosive effects and deformation.In addition, the interior decorative walls in the room, experienced builders often pay attention to the presence of knots and their quantity in the wood, and this, in turn, reflects not only the aesthetic qualities, but the degree of strength of the material as well.

Edged timber in the form of a bar with a square cross-section used in the construction of cottages and houses, baths, and also to build frames for the construction of roofs and wall slabs.

Edged board is sawn wood, having a constant rectangular section along its entire length. Edged board has either not wane (edges left over from round logs), or present in the minimum prescribed standards quantity.

According to the type of cutting towards the longitudinal line logs, we are getting the following types of edged boards:
- Central (central part of the logs without core).
- Medullary (central part of the timber with the core).
- Sides (from the side of the logs and from the center to the flitch).
- Flitch.

At the first stage of production edged boards takes place when starting sawing logs.

The following types of cutting:

Radial sawing (cut extends through the central zone of the barrel, the annual rings are arranged on the board cut obliquely from 60 to 90 degrees to the plane of the board, such a timber is less deformed during the entire drying or moisture absorption, but duringmanufacturing getting a big quantity of wastes).

Semi radial sawing (annual rings are angled 45 degrees to the plane of the board, reduces the amount of waste and the total value of the timber).

Tangential cutting (incision is made at a distance from the center of the log, with the surface of the board has a clear wood structure, but is not designed to resist to the dry and swell; waste with this method of cutting is the minimum).

Sorted edged boards stored in stacks, free flowing air for natural drying of wood. Typically, the board is further treated with antiseptics to prevent decay. The most effective antiseptic boards protective structure under pressure (for deeper penetration into the wood antiseptic). So treated pine boards, for example, are much stronger and more durable.

Usually when you select edged boards pay attention to its characteristics such as the width and thickness of the boards, wood species, and the number of procedures performed on the board (drying, gouging, antiseptics process during the summer period, etc.) and surface quality. Depending on these boards is determined by grade, its final price.

There are common standards for the grade of edged boards, however, in some cases, boards and produce custom-made for individual technical standards.

The standard sizes of edged board are:
- Width: 100, 150 or 200 mm.
- Length: 6 mm.
- Thickness: 25, 40 or 50 mm.

And lumber must keep all the default moisture values.

Application of edged board in the construction unusually wide: from the creation of different designs of buildings to finish exterior or interior walls of buildings. Edged boards used in the manufacture of furniture, ceilings and floors creating residential buildings. Often, from this timber make different economic structures: garages, sheds, bathhouses.

The type of wood usually defined depending on the operating conditions of future constructions. Wood varieties and breeds differ in moisture resistance, strength and other characteristics of the material used. The most durable and expensive types of wood are commonly used for making furniture and interiors.

Species cheaper used for structural purposes. Timber common of hardwood (aspen, birch) is considered cheap: different material hardness, makes it difficult to process and pliability to rot. The most popular in the production of edged board such breeds as spruce and pine.

Structure of pine is denser from spruce, but spruce board is the best thermal insulator.Therefore, spruce goes for furnish and use at construction pine bearing structures.Edged board of larch, for example, is highly resistant to rot, therefore used in the construction of sewerage collectors and septic tanks (such constructions can last more than a hundred years).Highly popular to use at construction of edged board beautiful and environmentally friendly floors (relatively low cost) in residential buildings.

Standard quality requirements of edged board comprehensively specified in the Russian standards GOST 8486-86 «Softwood Lumber» containing all requirements forthe edged and unedged boards, small and big bars made of pine, larch, fir, spruce or cedar.A term used in the production of lumber in Russian standards is GOST 18288-87.