Each kind of boards depending on the type of wood, from which it is made, has differences in properties and characteristics. For example, the most widely varied the thermal conductivity, the degree of water resistance, hardness and durability. These same properties can to some extent, depend on the processing performed. Price on edged boards is determined by the totality of all the listed properties.

Furthermore, the cost can depend on the initial machining (sawing) of this type of timber. In total, today, there are 3 types of cutting. It can be radial, tangential and half radial cut.The first kind is characterized by its high cost, as it requires more lumber. Boards in the sawn timber are exactly in the center, in the core. The result is strong and resistant to external influences material.

The half radial way of cutting must be done at an angle equal to 45 degrees, and the board’s cost is cheaper, and the properties are not as rich as the radial cut.Tangential cut is most budgets one, the beam is cut away from the core, resulting in a more pronounced structure.

The leading positions in sales edged boards are boards made of softwood: from pine and spruce.Due to its dense structure such material is used in finishing and it’s the most convenient one. A board of pine can be used to create floors and wall frames. More expensive wood usually go for furniture and decorative elements.

The best places to buy lumber from are large suppliers and construction companies such ours that have managed to win a good reputation in the market. Just so you can buy high quality timber board at an affordable price.

Usually cheap timber can be purchased from the manufacturer, for example, we have. In this case the benefit of the buyer can be quite substantial. Delivery of goods is without intermediaries, and transportation costs are excluded. However, all is not as easy as we would like.

Regarding the acquisition of cheap lumber for small private sawmills.

The whole process from a technological point of view is rather complicated. Most often, a private manufacturer of sawmill does not comply with the deadline. Because of this, cheap lumber that you are going to buy, purely because of the economic principle added to the price, as stretched as possible.If there is simply no sawmill lumber and working for a long time, it can also undermine your budget. Who will pay them for what they do not work because of the banal unavailability of raw materials?

On a small sawmill there is not modern technology, and update all existing equipment is quite expensive. Therefore, treatment of the material takes place only on the old methods. Often, the manufacturer violates cutting geometry, thus, the size of the resulting boards may vary.Such a timber, of course, will cost very cheap, but the quality will be the average one. Then you need the assistance of experienced professionals.

Not on each sawmill has its own warehouses, and especially those who meet all the conditions of storage of the material produced. Consequently, there were cases when cheap timber turned out to exceed several times the humidity standards.And if boards are not stacked as required by generally accepted standards, thenit will add undesirable curves.When ordering a custom size timber, it can be difficult to produce. These classifications need to pre-negotiate with the leader of sawmill in order to prevent any possible loss of time and unnecessary problems.

Our company offers a big choice of different kinds of lumber from the widest range of wholesale rates. To purchase lumber from now on you do not have to travel around the numerous vast databases, as desired to buy products you can only order the right amount. We sell materials at relatively low cost in the Moscow region and the capital itself, because our company is closely associated with the supplier.

Among the products we realized there are many different types of timber, including those that have appeared recently: floor board, planed, edged, timber, brick, siding, Lining, block-house and others.In any case, our proposed choice will fully satisfy your preferences. These products are popular in today’s market is not only individual consumers, but also more or less large enterprises. The specialists of our management department are always ready to answer all your questions with regards to the purchase of lumber.

Receiving the goods takes place as soon as possible, since the procedure of registration debugged us to the point that it may require no more than 2-3 hours.

The available in stock have a large database of lumber, the most sought after. Potential buyer of lumber needs only contact us, and he will get what he needs in the best way for him.

For us the most important that the buyer leaving with a smile on his face and after some time returning to us again for the next purchase. In addition, our specialists respect and appreciate his trade.

Proper production of a timber must necessarily take place in three stages, each of these steps is important.

Three required stages production of timber:

•  At the first stage of manufacturing producer needs to carefully select the workpiece. They must be strong, and without knots or other defects of wood.
•  The second stage — the main. It is to cut in accordance with what is supposed to be finished lumber output. It is best to cut this was carried out on modern equipment, that manufacturer had an opportunity to guarantee the quality of its products.
•  At the third stage, a product resulting with various chemicals (antiseptics) to improve internal useful properties of wood (moisture resistance, strength, durability).

Technology specialists of our company fully comply with the above order of manufacture, so buying timber from us; you will have no reasons to doubt, because you are getting really high-quality and durable timber.Also, we produce lumber by a specific order, it is from the same species of wood that the client prefers. In this case, the price is determined directly on the basis of complexity and order volume.

In most cases, plays the role of the procurement process and the kind of material. Making a current timber needs conventional solid wood, while the output is a solid board. To get such a boardyou need a very well processed one which smooth on all sides without bark. In order to get a high quality finished product, you must use the sawmill and the output is the required thickness.

How to get a timber with a specific size?

Cutting wood is by a universal machine as sawmill.On the treated surface of the log can retire a few boards on both sides. The result isa board which is being finalized by removing from it the two slabs of a certain thickness. Through these activities, obtained timber size 200 × 200 mm, which is smooth from all sides.

In order to get the beam size of 100 × 100 mm, you need to use multiblade saw and make the cut logs into boards with the necessary thickness. Two boards can be attributed to the slab; the remaining materials are going into a new party.

Such a timber as a board is very popular by using it in the construction of country houses. It’s popular because homes are built with the help of it much faster than stones, and at the same time it gives a little shrinkage.In our days it is very important to use timber from pine. This type of wood has a number of advantages and it perfectly copes with rotting, the high level of stability in the work process.

What is the square-edged lumber? This material, when you look at it, you can see the smooth four-treated surfaces. By the Russian standard GOST 8486-86 the thickness of this material is one hundred millimeters.A close examination of the standard timber becomes clear that it has a square section. In some cases, a rectangular cross section using, this already makes the thickness of one to two.

First of all, the timber from the manufacturer differs by dryness.Bruce is dry and has natural moisture.The price is low because it doesn’t need a special treatment to reach to the required level of humidity (8%).But from an operational point of view, dry timber is better, and the period of building the house is very short, and hence should improve the quality of the foundation of a particular construction.

The most popular material, which applying in construction, is the timber from the manufacturer from softwood like pine or spruce.Apparently, this is due to good water resistance and reliability of the material.Also, in great demand from builders uses timber from larch, as its wood is very durable.

The price of timber from the manufacturer mainly based on its size and the type of wood used as raw material for its manufacture.As standard, the thickness of such products should not be less than 100 millimeters. Bars have different varieties. It is all from the same material, but of smaller size (e.g., 50×50 mm). It is used to create temporary construction, ceilings, beams, and any other similar works.

If the climate in your area not ideal, you’ll like timber 200×200, it perfectly retains warmth and prevents cold wades into the house.A few smaller lumbers — 150×150 is not designed for such purposes, but the heat at ambient temperature: 30-35 C keep it quite capable.For load-bearing parts of the frame house under construction and rough work can approach timber with dimensions of 100×100.

The quality of any timber is determined primarily by its surface which must be perfectly flat and smooth and have no knots and chipping.That is the product we produce. After high quality carried lumber processing, additional finishing interior walls is not required, in addition, reduces your financial construction costs.

Here you can purchase high-quality timber from the manufacturer, wholesale or retail. Big range of sizes of our lumber is always at the right high level.

Before buying a timber you must decide exactly what type you need. There are three kinds of timber:

• two side’stimber with treatment from two sides;
• three side’stimber with treatment from three sides;
• squared timber with treatment from four sides.

The most demanded squared timber, in which all four sides equal. Cut has a rectangular shape, which must necessarily correspond to one of the parameters GOST. Also, now it’s very common to order the production of timber, where you can offer your own size.

What is the price of the timber?

The pricing in the first place, affected bythe length, the quality of the finished product, wood species and other little less important factors.Our prices comparing with the quality are the best and keeping our clients satisfied.

Board

There are two types of boards: not edged and edged. Not edged board is a result of primary processing of wood, basically, it is coniferous and some others, such as ash, oak and cedar. The edges of the boards are raw, that’s why one of them can have bark residues.Because of its versatility and unpretentiousness, not edging board can be used in many areas of construction. It can be freely used for roofing, flooring and create many other works.Wherever needed solid construction, and the appearance is not very important, the best choice is the not edging boards.Edged board also has processed surfaces, has no bark, unlike the not edging, and scope of application is wider, since in addition to important qualities of strength, it also looks attractive. Of course, price of such a board is a little higher.

How to choose and buy a board?

Quality of not edging, and indeed any board can be identified by the presence of various surface defects such as knots, nicks, dents etc. All those, of course, should not be on the boards with a high quality.

Board can be purchased in our company. Here you can buy high-quality boards for the best price. We have a lot of kinds of boards with different grades, even with any quantity you need. You don’t need to dig through the internet to find the right supplier anymore. You reached to the wright address.

Earlier, people mainly usedwhole logs in the construction of their houses, but due to significant deficiencies,they started using such material like bar or timber which became very popular.Now, the main wood construction lumber became more sophisticated, such as Edged board, bar, block-house and others.

Today, there are several varieties of glued timber in Tula. They are available in two, three and four sloped sides. Currently, the most commonly used in the construction of the triple glued timber, giving the impression of a log house, outdoor looks smooth, and indoor straight walls.The rest species can be used in completely different purposes, whether it is for the floor joists, various floors, which are also often manufactured from glued timber in Tula. The price of glued timber in Tula is not as high as its quality and how it looks like.

Especially important consideration is the moisture contents in the Bruce can be very high and vice versa, and then the timber is considered as a dry.There are two types of wood according to the degree of humidity: dry (8 to 12 percent) of the natural wood moisture, which depends on the ambient humidity.Of course, more is preferred dry material because of its strength and they are not susceptible to deformation. But timber natural moisture property has little to modify its shape under the influence of unfavorable external factors. Wooden timber are often used to create furniture, interior finishing of residential buildings, the construction of baths, pavilions and other buildings, whichmost of the people just can not imagine their lifewithout it.Now, timber in Tula at our factory so numerous that some manufacturers have to sell it at a lower price, so hurry!

• Low cost;
• The possibility of rapid production, delivery and build homes, without special equipment and machinery;
• Excellent thermal insulation;
• Houses built with such a material, easy to decorate;
• Clean material for the environment.

The most common materials in the production of timber are mainly conifers (spruce, pine, and in rare cases — larch).Usually, timbermade of pine woodhaving the best quality, because it has less knots and other nasty chipping. Resins impregnated by the pine wood, allowing it to retain the initial properties for long periods, as well as protecting it from the effects of excessive amounts of moisture. Timber, made ​​of spruce, has very insulation values.

The minimum size of standard timber is 100×100 mm, if smaller dimensions, usually called bars. Maximum size of timber is 200×200 mm; larger dimensions are usually made by order.For the width of timber, it primarily depends on the place of application and climate conditions. The house, built from timber with dimensions 150×150 mm perfectly able to keep warm in 30-degree cold. Lumber sizes from 200×200 mm used in harsher climates.

In Moscow you can buy almost any kind of timber. In the capital this kind of building material was very widespread.

Nowadays the wood is considered one of the best choices for building a house all over the world. People watching regularly changing trends and are well aware of the ecology, its healthy and durable. That is why, now most of the people when buying any thing asking from which country it is brought and from which material is made.

The main advantage of wooden materials is that they «breathe», the air is passing through it. In the past time, a lot of people even considered that wooden housesare alive because they arecaring about those who living inside like people caring about their visitors. May be that is why, the house during the winter quickly absorbing the heat given by the battery and other heaters, and in the summer to maintaining a comfortable temperature.

One more important advantage of the home from timber is that erecting it is not difficult, and constructing such houses usually very fast. In addition, it doesn’t matter which type of ground using in the foundation.It should be noted that if your home will build professionals, probably they will make the most elegant designswhich can be made easily from wood.As a result, the interior of your home will look like a fairy tale invented by you, warmth and goodness.

However, we still ask ourselves the question: why timber from the Moscow region? Why not log? Experienced builders recommend a timber or bar, primarily because it is the most favorable and convenient for construction activities.timber not keeping even the smallest gaps, which may miss the cold or excessive moisture, and the assembly of timber, as we have said earlier, is quite fast.

When choosing building materials such as timber from the Moscow region, you need to correctly assessing your budget.If it is limited, then the ideal option would be profiled-dried or wet timber. Same for residential houses recommended using glued timber from Moscow region. The price of the natural one will be slightly higher, but experts’ saying it’s worthy to choose it.

Generally, the choice should be of the customer himself. The house, built from any kind of timber, even if profiled, though glued or any others, will long serve his owner without losing its former elegance.